100% WATERPROOF : The Blinder MOB is IP67 Tested and 100% waterproof against all elements
BUTTON : Longer button push on (0.75sec) prevents accidental turn on. Short presses switch modes continuously.
INTEGRATED USB PLUG : No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements.
LEDs : Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.
CHARGE TIME :4 -5 hours (LED will turn green when fully charged)
BATTERY : USB Rechargeable Lithium Polymer
BIKE ATTACHMENT :Tool-less removable silicone straps for bars/posts 22 - 35mm+ diameter. Fits Aero & Oversize bars /posts.
ACCESSORIES INCLUDED : For front light 2x interchangeable straps for bars 22-27mm / 28-32mm+. For rear light 3x interchangeable straps for posts 22-32mm+ and Aero seatposts.
When plugging the light into a USB port to charge a red LED will display on the on/off switch of the light to indicate that the light is charging. When fully charged this light will turn green to indicate charging is complete.
To activate storage mode make sure light is first turned off. Then hold down the on/off button for 5 seconds and release when red LED comes on. This LED will stay lit until the light drops into storage mode.
To reactivate light, plug into USB port and charge as usual. Once charged light will turn on as before.
Liquid error (layout/theme line 206): Could not find asset snippets/zip-money.liquid